6. Recording Breakdown Screen: Change the Display of Sequences

From the Record Breaking Into Play Sequences screen, you can change the way sequences are displayed on the main panel. Here's what you need to do to change the display:

1. Go to the Breakdown of the recording into game sequences screen  from the Games tab .
2. On the panel at the bottom right of the screen, press the next button:  .

You can now see two different buttons, all selected by default: Link tags with phases  (link your tags to game sequences created according to the 24-second timer) and  Display game time information  . Depending on whether or not these buttons are selected, there are several display possibilities, each of which is explained in this article.

Option 1: All options are enabled

This is the default display: the sequences are displayed according to the 24-second stopwatch.

Option 2: "Link tags with phases" disabled

By choosing this option, the sequences displayed are no longer linked to the 24 seconds chrono but in relation to the tags carried out throughout production. The default length is 35 seconds, which cab be changed via the Settings tab of the application.

If the Link tags with phases option   is disabled, you will NOT be  able to add tags from the Record  Breakdown into Play Sequences screen .

Option 3: "Display game time information" disabled

Via this option, you will no longer see the playing time displayed for each sequence, but the time at which the sequence took place. 

Option 4: All options are disabled

This option only shows you the sequences created against the tags, and shows you the time of the sequences instead of the playing time information.

If the Link tags with phases option   is disabled, you will NOT be  able to add tags from the Record  Breakdown into Play Sequences screen .